| Speed Hetzer! - Page 2 |
Page 2 of 3
  All done and so on with the paint. I'd primed or pre-shaded the kit with Tamiya flat black. Then the model was checked for bits that required attention or cleanup.
   This was followed by a Dark Yellow mix consisting of Dark Yellow (funnily enough) Buff, and White...      I then placed some Blutac in irregular shapes on the model and sprayed it with a dark green mix. When dry I masked off areas that would get some red brown, again using Blutac. The road wheels received a coat of the red brown as well...
       I let this dry for about an hour before removing the Blutac, then sprayed the crossed using a template and applied a clear coat. When that in turn was dry, I applied a couple of generous coats of hairspray...   Next was the white wash. Flat White was sprayed over the entire model...
  After about 40 minutes, using some warm water and an old stiff brush, I started to remove bits of the white coat....   Sponsored by...   |
||||||
Login
Follow Us On Twitter!
www.twitter.com/modelarmour
Site Sponsors
Donations
All donations are gratefully recieved. Thank you for your generosity.